From: Marc Kleine-Budde Date: Wed, 6 Aug 2025 10:44:54 +0200 Subject: [PATCH] ARM: dts: stm32: add resets property to m_can nodes in the stm32mp153 On the STM32MP153 the m_cam IP cores (a.k.a. FDCAN) have an external shared reset in the RCC. Add the reset to both m_can nodes. Signed-off-by: Marc Kleine-Budde Upstream-Status: Submitted [Upstream-Status: Submitted [https://lore.kernel.org/all/20250812-m_can-fix-state-handling-v1-0-b739e06c0a3b@pengutronix.de] --- arch/arm/boot/dts/st/stm32mp153.dtsi | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/boot/dts/st/stm32mp153.dtsi b/arch/arm/boot/dts/st/stm32mp153.dtsi index 4640dafb1598..92794b942ab2 100644 --- a/arch/arm/boot/dts/st/stm32mp153.dtsi +++ b/arch/arm/boot/dts/st/stm32mp153.dtsi @@ -40,6 +40,7 @@ m_can1: can@4400e000 { interrupt-names = "int0", "int1"; clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>; clock-names = "hclk", "cclk"; + resets = <&rcc FDCAN_R>; bosch,mram-cfg = <0x0 0 0 32 0 0 2 2>; access-controllers = <&etzpc 62>; status = "disabled"; @@ -54,6 +55,7 @@ m_can2: can@4400f000 { interrupt-names = "int0", "int1"; clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>; clock-names = "hclk", "cclk"; + resets = <&rcc FDCAN_R>; bosch,mram-cfg = <0x1400 0 0 32 0 0 2 2>; access-controllers = <&etzpc 62>; status = "disabled";